What Is The Back Of A Window Air Conditioner Called?

What Is The Back Of A Window Air Conditioner Called?

What Is The Back Of A Window Air Conditioner Called?

The back of a window air conditioner is called a Condenser coil. This is the part of the unit that has coils that absorb heat and convert it into mechanical energy through a motor. In these heat exchangers, the mechanical energy literally turns cold into hot. This happens when you put up your window in hot weather.

The condenser coils are located in the refrigeration section of a window air conditioner and are made of copper tubes made from recycled discarded beverage cans. The heat from your room cools down these coils and makes them cold.

At this point, water flows through pipes attached to them which then get heated up to be turned back into steam, which is then blown out by outlets attached to them as airflow. This process is called the Vapor-compression cycle which is fundamental to these appliances.

Also, for further information about this process, you can check out our article about the different types of air conditioning and how it works. These coils are also known as evaporators which remove heat from the air that is blown into a house.

The airflow evenly passes through these tubes and then through the blower fan which blows cool air throughout your house. So, this is what the back of your unit looks like:

The back of a window AC unit has lots of cooling coils that absorb heat from within and outside the house. The output side (outside) has vents that allow moisture to escape while keeping humidity in.

The side has a panel that appears to be a separate window but it’s actually part of the unit for aesthetics. This allows for more cold air to flow out instead of through the main vents in the front/back of your unit.

Can You Have An Air Conditioner In A Fire Escape Window?

Residents are generally prohibited from installing air conditioners in fire escape windows. However, if the apartment has a second window onto the fire escape that is large enough to be used as an emergency exit, they can install one in a fire escape window.

Residents are prohibited from installing air conditioning units in fire escape windows to protect the safety of the occupant. Also, one of the most important things when it comes to fire escape windows is that they can be opened from the inside without the use of keys, which also makes them unsafe for air conditioners.

It is also important to note that these windows are not rated as emergency exits and they cannot hold the weight of an air conditioner, which means that if one accidentally breaks in a natural disaster, it will not be able to withstand the force and will collapse.

If a fire escape window is used as an emergency exit, then it should have an operable exterior door on or adjacent to the unit and all exterior doors must lead directly outside. These fire escapes, if they are made of wood and are more than 5′ away from the nearest window, must meet the same standards as the stairways in that apartment.

This is because any un-rated window smaller than double hung, with a bottom larger than 36 inches wide, could not withstand the weight of an air conditioner if it were to break. Furthermore, fire escape windows are not designed to serve as emergency exits for an apartment or building.

Also, building codes state that interior doors cannot be used in fire escapes without meeting certain requirements for both strength and fire resistance and this would also be a concern when installing an AC unit inside a fire escape door