How Can I Reduce The Heat From My Polycarbonate Roof?

How Can I Reduce The Heat From My Polycarbonate Roof?

How Can I Reduce The Heat From My Polycarbonate Roof?

Several methods control the heat that accumulates beneath a poly carb roof. And it only takes a few basic design strategies to do so.

1. Go high. Raising the roof height raises any warm air over head height. If a flat roof is too low, consider a gable design.
2. Create a cross breeze. Any warm air may escape if you leave one or both gables’ ends open.
3. Make an informed decision about your roofing. Use a Level 3 polycarbonate sheet, such as those made by Ampelite. The difference in heat penetration is remarkable.

Approximately 85% of heat is allowed in via clear polycarbonate. Ouch! Level 3 “Silver Mist” only let in roughly 18% of the heat. That makes a significant impact!

4. Put in a fan. It appears to be easy, and it is! Especially with the additional headroom provided by a gable-type architecture.

You can create a beautiful, light-protected place that keeps you cool with a few design tricks!

What Do You Use To Flash A Polycarbonate Roof?

There are a few different ways that you can flash a polycarbonate roof, but one of the most effective and reliable methods is to use self-adhesive flashing tape.

This tape is designed to be compatible with polycarbonate roofs and is also safe for other substrates such as PVC, brickwork, and timber.

When properly installed, self-adhesive flashing tape will provide a water-tight seal that will keep your polycarbonate roof in good condition for many years.

Why Is My Polycarbonate Roof Leaking?

The most common cause of leaks in polycarbonate roofs is broken seals or leaky flashing. When the seals or flashing around the roof panels become damaged, it can allow water to seep in and cause leaks.

In some cases, the damage may be caused by normal wear and tear, while in others, it may be due to severe weather conditions. If you suspect that your polycarbonate roof has a leak, it is important to have it inspected.

Polycarbonate conservatory roofs are made by building a roof structure and affixing plastic panels onto it.

The polycarbonate roof panels are secured into the structure with sealing and flashing. Both can wear down over time, causing leaks between panels and the roof frame.

Does A Polycarbonate Roof Provide Shade?

Yes, polycarbonate roofs provide shade. A poly-carbonate canopy shade is an attractive option for any building entrance as it allows light to pass through while providing shelter from rain and extreme sun.

Polycarbonate is a durable material that is also perfect for glazed walkways used to connect buildings and provide all-weather protection from the elements.

Is Polycarbonate Roof Good For Snow?

Yes, polycarbonate roofing is an excellent choice for snow and ice protection. Polycarbonate panels are an excellent choice for roofing material in areas that experience heavy snowfall.

The panels are resistant to extreme temperatures, sunlight, and impact, which means they will last for many years without fading or discoloring. The panels are also resistant to damage from various impacts over the years.

Can You Pressure Wash The Polycarbonate Roof?

No, it is unsafe to subject polycarbonate panels to high-pressure water.  Higher pressure may cause the panel to crack or shatter, which can be dangerous.

To clean polycarbonate roofing, use a standard garden hose to rinse any loose material before cleaning the panels. This will ensure that you do not damage the roof.

Can You Paint The Inside Of A Polycarbonate Conservatory Roof?

Yes, you can paint the interior of a polycarbonate conservatory roof. A conservatory roof can be painted. However, with polycarbonate sheets, you must prepare the surface to prevent flaking paint.

While it is a non-porous material, like other plastics, it still requires the proper coating before painting. It is best to install self-adhesive stainless steel roofing before painting a polycarbonate roof. This can prevent damage to the roofing.